Installing the Paper and the Chicken Wire
Use furring nails to secure the paper and wire to the sheeting. This will allow you to bring the wire out about 3/8 of an inch or so while the paper lays flat against the OSB. Use a nail about every 2 to 3 wire grids. After you're finished, pull on the wire to see where it moves the most. Add additional nails so you don't have any real loose wire. If it's a little loose, that's ok. If the wire is allowed to move around too much, and sticks out, when you put on your first coat of mud, you won't be able to make that part of the wall go flat.
