Author |
Topic: Minimize time. (Some physics) (Read 1586 times) |
|
Earendil
Newbie
 
Gender: 
Posts: 46
|
 |
Minimize time. (Some physics)
« on: Apr 18th, 2005, 2:10pm » |
 Quote  Modify
|
Definition: You have 2 points, A and B, on a plane. There is a gravitational field of equal intensity and direction, paralel to the Y axis, acting on every point of the plane. A has more potential energy then B
Question: What is the curve which conects A to B and minimizes the time an object on A takes to slide to B (the only force acting on it is gravity).
(There is a proposital ambiguity on defining what a 'curve' is)
|
| « Last Edit: Apr 18th, 2005, 2:14pm by Earendil » |
 IP Logged |
|
|
|
towr
wu::riddles Moderator
Uberpuzzler
Some people are average, some are just mean.
Gender:
Posts: 13730
|
|
Re: Minimize time. (Some physics)
« Reply #1 on: Apr 18th, 2005, 2:32pm » |
Quote Modify
|
So.. Basicly you want to throw a waterballoon from ontop roof A onto the head of passerby B below, along the arc which takes the least time.
Under the usual assumptions (flat earth, etc)
Just throw at B with an infinite speed 
But for all intends and purposes it's a parabola
Do you need any proof? (Assuming I interpreted the problem correctly)
|
| « Last Edit: Apr 18th, 2005, 2:36pm by towr » |
IP Logged |
Wikipedia, Google, Mathworld, Integer sequence DB
|
|
|
towr
wu::riddles Moderator
Uberpuzzler
Some people are average, some are just mean.
Gender:
Posts: 13730
|
|
Re: Minimize time. (Some physics)
« Reply #3 on: Apr 19th, 2005, 12:27am » |
Quote Modify
|
Then you have a centripetal force working on it aside from gravity, don't you?
|
|
IP Logged |
Wikipedia, Google, Mathworld, Integer sequence DB
|
|
|
Deedlit
Senior Riddler
Posts: 476
|
|
Re: Minimize time. (Some physics)
« Reply #4 on: Apr 19th, 2005, 3:15am » |
Quote Modify
|
Well, there's also the normal force from the surface it's sliding on. I think saying that there's also a centripetal force is misleading, since centripetal force is just whatever part of the net force that is making the object go around in a circle.
|
|
IP Logged |
|
|
|
towr
wu::riddles Moderator
Uberpuzzler
Some people are average, some are just mean.
Gender:
Posts: 13730
|
|
Re: Minimize time. (Some physics)
« Reply #5 on: Apr 19th, 2005, 4:37am » |
Quote Modify
|
on Apr 19th, 2005, 3:15am, Deedlit wrote:| Well, there's also the normal force from the surface it's sliding on. I think saying that there's also a centripetal force is misleading, since centripetal force is just whatever part of the net force that is making the object go around in a circle. |
|
Yes, in this case it's just the normal force of the surface (or wire, or whatever).
But there has to be some force that keeps it from following a parabola, which is what it would do if there was only gravity.
|
|
IP Logged |
Wikipedia, Google, Mathworld, Integer sequence DB
|
|
|
Earendil
Newbie
Gender:
Posts: 46
|
|
Re: Minimize time. (Some physics)
« Reply #6 on: Apr 19th, 2005, 1:28pm » |
Quote Modify
|
Ops... indeed, there are many forces acting upon it. I guess what was meant to be said is that at time 0 the object is standing still and after that it only gains more cinetic energy from the potential energy. The curve is something like a 'slideboard' (I don't know if that is the correct word in english).
Indeed, this is the Brachistochrone Problem. But there are some intuitive and very interesting solutions to it.
|
| « Last Edit: Apr 19th, 2005, 1:32pm by Earendil » |
IP Logged |
|
|
|
atulsinghk
Newbie
Posts: 1
|
|
Re: Minimize time. (Some physics)
« Reply #7 on: Apr 20th, 2005, 12:55am » |
Quote Modify
|
hi
I am working to develop a sprinkler by having a perforated pipe where small diameter (1.5 mm) holes are located at different trajectory angles and at different locations with respect to its centre of axis of rotation. Pipe is pivoted in the middle and holes are in two opposite direction to facilitate the rotation by formng a couple when water is allowed to pass.
I am struggling to develop its hydraulics a). static condition and b). while in rotation.
As per irrigation objective we need to ensure uniform water application and we want that it requires minimum of energy to facilitate rotation for desired wetting front.
atul
|
|
IP Logged |
|
|
|
SWF
Uberpuzzler
Posts: 879
|
|
Re: Minimize time. (Some physics)
« Reply #8 on: Apr 20th, 2005, 5:33pm » |
Quote Modify
|
A related problem may be found in this forum under, Abel's Wire Problem. In that one, the shape of wire that results in time being a desired function of starting height is asked. If time is independent of starting height, the answer turns out to be the same as for this problem.
|
|
IP Logged |
|
|
|
|
RIDDLES SITE
WRITE MATH!
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print