Author |
Topic: surface area measurement (Read 594 times) |
|
jabhiji
Newbie
Gender: 
Posts: 24
|
 |
surface area measurement
« on: Aug 27th, 2003, 5:58pm » |
 Quote  Modify
|
Is there some practical and accurate way to measure the surface area of a finite, odd shaped object (say the human hand up to the wrist) ? In school, they taught us to measure volumes by immersion in water....seeing how much flows out and stuff.....but I can't think of how to measure the area.
|
|
 IP Logged |
|
|
|
SWF
Uberpuzzler
Posts: 879
|
|
Re: surface area measurement
« Reply #1 on: Aug 27th, 2003, 6:10pm » |
Quote Modify
|
There are many ways. A couple of the more practical that come to mind:
If you have an accurate scale, weigh piece of paper to figure out how much it weight per unit area. Cut out the tracing of your hand and weigh it. Then you can figure it out.
Scan the picture of the traced shape into your computer with a scanner. Fill in the area with image editing software. Then use the software to find out what fraction of the area is covered by the filled in color. That is roughly what I do, although I had to write a simple program to count how much of the area is covered, since my scanner software doesn't do it.
|
| « Last Edit: Aug 27th, 2003, 6:11pm by SWF » |
IP Logged |
|
|
|
Icarus
wu::riddles Moderator
Uberpuzzler
Boldly going where even angels fear to tread.
Gender:
Posts: 4863
|
|
Re: surface area measurement
« Reply #2 on: Aug 27th, 2003, 7:30pm » |
Quote Modify
|
Another means is to find a liquid substance that binds to the object being measured in a uniform layer. There are a number of possibilities. Some oils will work if the process is done carefully. Paints will often work even better.
Measure the volume of the oil before and after dipping the object in it. Divide the difference by the thickness of the layer.
To determine the thickness of the layer, do the same thing with another object whose area is known. Divide the volume obtained by the area.
It is important that the film be uniform, so there are some limitations to the accuracy of this method. But then SWF's methods only work for flat surfaces (be warned here that I use "flat" in the differential geometric sense: you can't bend a piece of paper to match it, not even for a small section.)
|
|
IP Logged |
"Pi goes on and on and on ...
And e is just as cursed.
I wonder: Which is larger
When their digits are reversed? " - Anonymous
|
|
|
|
RIDDLES SITE
WRITE MATH!
Home 
Help 
Search 
Members 
Login 
Register
Reply
Notify of replies
Send Topic
Print